At the technical inspection (keuring), your tyres are checked thoroughly. A tyre problem can mean a re-inspection. These tips help you arrive prepared.
What is checked?
- Tread depth: at least 1.6 mm across the whole tread.
- Damage: cuts, bulges, cracks and exposed cords.
- Matching tyres per axle: left and right the same size and type.
- Tyre size: a size listed on your certificate of conformity, or an equivalent size.
- Load and speed index: at least as prescribed.
- Rims: no cracks or deformation, all wheel bolts present.
Winter tyres at the inspection
Driving on winter tyres with a lower speed rating? Make sure the sticker with the maximum speed is in the driver's view.
Common mistakes
- Two different tyres on the same axle, for example after a puncture.
- Too little tread on the inside, while the outside still looks fine.
- A repaired or damaged sidewall.
- A tyre size that doesn't suit the rim or the car.
Tips before the inspection
- 1Measure your tread in several places, including the inside.
- 2Set the right tyre pressure.
- 3Check the sidewalls for damage.
- 4Bring your certificate of conformity.
Not sure your tyres will pass? Drop by beforehand and we'll check them.









