Skip to content
Rims2 min read

Choosing rims: bolt pattern, offset and centre bore explained

5x112, ET45, 57.1 mm: what do all those numbers mean? How to be sure a rim fits your car.

A good-looking rim doesn't automatically fit your car. These five measurements decide whether a rim is suitable.

1. Diameter

The diameter in inches, for example 17 or 18 inches. It determines which tyre size you need.

2. Width

Expressed in inches with the letter J, for example 7.5J. A wider rim needs a wider tyre. Every tyre size has an approved range of rim widths.

3. Bolt pattern

The number of wheel bolts and the diameter of the circle they sit on, for example 5x112: five bolts on a 112 mm circle. This must match exactly.

4. Offset (ET)

The distance in millimetres between the centre of the rim and the surface that sits against the hub, for example ET45.

  • A lower ET pushes the wheel further out.
  • A higher ET pulls the wheel further in.

The wrong offset can make the tyre rub against the wheel arch or suspension.

5. Centre bore

The diameter of the hole in the middle of the rim, for example 57.1 mm. If the centre bore is larger than your car's hub, use centring rings. They keep the wheel perfectly centred so you don't feel vibrations.

Also check

  • Load capacity of the rim, important for heavy cars and SUVs.
  • Wheel bolts or nuts with the right seat: conical, ball or flat.
  • TPMS sensors that fit the new rim.

Give us your car's make, model and year, and we'll find rims that are sure to fit.